There are two very different things called a "universal remote app". One emulates an IR blaster and needs either a phone with built-in infrared or an external dongle. The other — the kind Remote97 is — talks to devices over your local network using the manufacturer's own IP control protocol. No line of sight, no hub in the middle, no monthly fee.

That distinction matters because modern AV gear is already network-connected. Your receiver, TV, streamer and multi-room speakers each expose a control endpoint; an app only has to speak it correctly.

Which devices can one app actually replace?

Remote97 discovers and controls a wide range of gear over the LAN:

See the full supported-device list and the complete home theater control guide for how these fit together.

Why local IP control beats a cloud hub

The trade-off is handled in detail in Why local IP control beats cloud hubs.

Three steps to a single remote

1

Install Remote97

Android, Windows and iOS — get it from the download page. No account, no sign-up.

2

Join the same network and discover

The app combines SSDP / mDNS discovery with directed probes for the devices that do not broadcast (Xiaomi, PJLink, BluOS, Zidoo, VidOn). Anything that still hides can be added by IP.

3

Build one screen, then automate it

Arrange buttons, a camera tile and PTZ controls into a custom control panel, then chain power, inputs and delays into a one-tap movie night scene.

When a phone remote is NOT enough

Be realistic about power-on. Devices whose network interface sleeps in deep standby (most TVs, some players) cannot be woken by a LAN command. Keep the original remote for the first power-on, or enable your device's Network Standby / Quick Start option where available.