If your Denon or Marantz receiver is on the network but the handset remote is lost, dead, or buried in the couch, you don't need a replacement remote or a $500 control processor. Any phone on the same WiFi can drive it.

What you can control

How it works (no cloud, no hub)

Local only. Denon and Marantz receivers speak a simple text protocol over Telnet (port 23) or HTTP on the local network. Remote97 sends commands directly to the receiver's IP address — nothing leaves your home, and it keeps working when the internet is down.

Steps

1

Install Remote97

Get it from Google Play, the App Store or Microsoft Store. No account, no setup wizard.

2

Put your phone on the same WiFi

The receiver and phone must be on the same local network. (Avoid VPN/tunnel apps that redirect traffic.)

3

Open Remote97 and let it discover

It scans with SSDP and mDNS and lists compatible receivers. Pick yours.

4

Control

Tap the receiver to adjust volume, switch inputs, change sound modes and power it on/off.

Which models are supported?

Essentially any Denon or Marantz AVR with an Ethernet or WiFi connection and network control — the same models that work with the manufacturer's own HEOS/AVR apps. That covers the X-series, A-series, SR-series and most network receivers from roughly the last decade.

Tips